-
105 resin mixed with the 205 standard hardener is used in the majority of situations to produce a rapid cure. WEST SYSTEM 105-205 cured resin/hardener mixture yields a high-strength, rigid solid which has excellent cohesive properties and provides an outstanding moisture vapour barrier with excellent bonding & coating properties. WEST SYSTEM 105-205 Pot Life at 25°C = 10 to 15 minutes, Cure to Solid State at 21°C = 5 to 7 hours Cure to Maximum Strength at 21°C = 5 to 7 days. WEST SYSTEM 105-205 minimum Recommended Working Temperature = 5°C Pumps Required = (5:1 ratio) 301, 306 or 309 -
WEST SYSTEM 104 Junior Pack is a 600g pack of West System epoxy (105-205). WEST SYSTEM 104 Junior Pack is designed for the small user or a refill for the Handy Repair Pack. -
WEST SYSTEM Mini Repair Pack contains a selected mix of materials to complete smaller repairs around the boat, in the workshop or at home. WEST SYSTEM Mini Repair Pack contents include: 250g of 105 Resin, 50g of 205 Hardener, 403 & 407 fillers, application tools, gloves, cleaning pads & instructions -
WEST SYSTEM 105-K kit includes all the materials required to complete a range of repairs to glass fibre boats. WEST SYSTEM 105-K Contents: 250g 105 resin, 50g 205 hardener, 402 milled glass, 409 microspheres blend, Three mixing cups, One reusable mixing stick, Two pairs nitrile gloves, Two glue brushes, Two syringes, 1m x 125mm 450g/m² biaxial glass tape, 1m x 75mm 175g/m² plain weave glass tape, 1m x100mm peel ply. -
This specially formulated filler is ideal to complete minor filling & bonding onto GRP surfaces. For GRP boat repair add 25% by weight of 402 to West System epoxy mix. Colour: White -
A blend of cellulose cotton fibres, used as a thickening additive for bonding applications. Epoxy thickened with microfibers provides good wetting out of the substrates and excellent gap-filling properties. Add 4% to 16% by weight to West System epoxy mix. Colour: Off-White. -
A filler designed to maximize bond strength in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap-filling applications. Add 35% to 60% by weight, depending on the viscosity required. Colour: Off-White. -
Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a naturally finished interior is intended. Alcohol or water based stains may be added to adjust the colour. Add 15% to 25% of Filleting Blend by weight. Colour: Tan -
General purpose thickening additive suitable for bonding, gap-filling and filleting. 406 can be used to prevent resin flow on vertical and overhead surfaces and to control the viscosity of the epoxy. Add 3% to 8% by weight to the resin/hardener mix. Colour: Off-White. -
A blended microballoon-based filler to make fairing putties which are easy to sand but remain strong on a strength-to-weight basis. Add 20% to 40% by weight to mixed epoxy. Colour: Reddish-Brown -
This low density filler is ideal for creating a lightweight, easily worked fairing compound, especially suited for large areas. Microlight holds a fantastic feather edge and is the easiest filler throughout the West System range to fair. Add between 7% to 16% by weight to mixed epoxy. Colour: Tan -
Versatile glass tapes are ideal for reinforcing chines, hull/deck joints and similar structural applications. When bonded with West System epoxy, they provide added tensile strength to resist hairline crack development and add added abrasion resistance. -
Versatile glass tapes are ideal for reinforcing chines, hull/deck joints and similar structural applications. When bonded with West System epoxy, they provide added tensile strength to resist hairline crack development and add added abrasion resistance. -
Versatile glass tapes are ideal for reinforcing chines, hull/deck joints and similar structural applications. When bonded with West System epoxy, they provide added tensile strength to resist hairline crack development and add added abrasion resistance. -
This non-crimp fabric combine two layers of unidirectional fibres ±45° which are stitched together using a light thread. The result is an engineered biaxial fabric with predictable, repeatable properties. The weight of this tape is 446g/m².
